# Copy stand to avoid camera tilt

**URL:** https://forums.negativelabpro.com/t/copy-stand-to-avoid-camera-tilt/5033
**Category:** Digital Camera Scanning
**Created:** [June 6, 2022, 8:36am UTC](https://forums.negativelabpro.com/t/copy-stand-to-avoid-camera-tilt/5033 "2022-06-06T08:36:29Z")
**Posts on this page:** 1
**Showing post:** 6

<div class="post-metadata">

### Author: ![Digitizer](https://avatars.discourse-cdn.com/v4/letter/d/57b2e6/32.png) [@Digitizer](https://forums.negativelabpro.com/u/Digitizer)
#### Post date: [June 16, 2022, 9:39am UTC](https://forums.negativelabpro.com/t/copy-stand-to-avoid-camera-tilt/5033/6 "2022-06-16T09:39:11Z")

</div>

Another device to adjust tilt:

> [@Let's see your DSLR film scanning setup!](https://forums.negativelabpro.com/t/lets-see-your-dslr-film-scanning-setup/27/146):
>
> I came across [this thing](https://www.amazon.de/Bresser-Stativkopf-Feinverstellung-Fotomontierung-Verwendung/dp/B07RY9LQTS/ref=sr_1_2?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=Bresser+polwiege&qid=1631626287&sr=8-2) on amazon. The device allows to point the camera precisely (to center a mirror image as [shown here](https://forums.negativelabpro.com/t/how-to-adjust-for-low-distortion/1676)) by turning the knobs so that the camera swings in two planes, left-right and fore-aft in a vertical setup. The photo shows the device with max swing in both planes. The base is Arca-Swiss compatible, the screw sticking out at the top has a standard 1/4 inch thread. Max dimensions are 4 in approximately, max load 6 kg. Here’s an image of…

Nevertheless, even the fairly stable column and carrier shown in the 2nd screenshot are elastic enough to allow some movement.

---

_[View the full topic](https://forums.negativelabpro.com/t/copy-stand-to-avoid-camera-tilt/5033)._