# Let's see your DSLR film scanning setup!

**URL:** <https://forums.negativelabpro.com/t/lets-see-your-dslr-film-scanning-setup/27>\
**Category:** Digital Camera Scanning\
**Created:** [March 16, 2019, 3:36am UTC](https://forums.negativelabpro.com/t/lets-see-your-dslr-film-scanning-setup/27 "2019-03-16T03:36:44Z")\
**Posts on this page:** 1\
**Showing post:** 146

<div class="post-metadata">

**Author:** ![Digitizer](https://avatars.discourse-cdn.com/v4/letter/d/57b2e6/32.png) [@Digitizer](https://forums.negativelabpro.com/u/Digitizer)\
**Post date:** [September 14, 2021, 1:36pm UTC](https://forums.negativelabpro.com/t/lets-see-your-dslr-film-scanning-setup/27/146 "2021-09-14T13:36:35Z")

</div>

![Screen 2021-09-14 um 15.21.40](https://canada1.discourse-cdn.com/flex029/uploads/negativelabpro/original/2X/7/745de0697684c7e10d6d8e199559eda562564cb4.jpeg)  
I came across [this thing](https://www.amazon.de/Bresser-Stativkopf-Feinverstellung-Fotomontierung-Verwendung/dp/B07RY9LQTS/ref=sr_1_2?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=Bresser+polwiege&qid=1631626287&sr=8-2) on amazon.

The device allows to point the camera precisely (to center a mirror image as [shown here](https://forums.negativelabpro.com/t/how-to-adjust-for-low-distortion/1676)) by turning the knobs so that the camera swings in two planes, left-right and fore-aft in a vertical setup.

The photo shows the device with max swing in both planes. The base is Arca-Swiss compatible, the screw sticking out at the top has a standard 1/4 inch thread. Max dimensions are 4 in approximately, max load 6 kg.

Here’s an image of the device in use:

 ![image](https://canada1.discourse-cdn.com/flex029/uploads/negativelabpro/original/2X/4/4c918f0a8b447011cffdd4eae617a26d35583daf.jpeg)

---

_[View the full topic](https://forums.negativelabpro.com/t/lets-see-your-dslr-film-scanning-setup/27)._