# Let's see your DSLR film scanning setup! **URL:** \ **Category:** Digital Camera Scanning\ **Created:** [March 16, 2019, 3:36am UTC](https://forums.negativelabpro.com/t/lets-see-your-dslr-film-scanning-setup/27 "2019-03-16T03:36:44Z")\ **Posts on this page:** 1\ **Showing post:** 60
**Author:** ![Maude](https://avatars.discourse-cdn.com/v4/letter/m/e5b9ba/32.png) [@Maude](https://forums.negativelabpro.com/u/Maude)\ **Post date:** [July 9, 2020, 1:35am UTC](https://forums.negativelabpro.com/t/lets-see-your-dslr-film-scanning-setup/27/60 "2020-07-09T01:35:47Z")
Hi! This thread is immensely useful and I’m learning a great lot. I’m about to pull the trigger on a dslr rig myself and would value the input of all members of the following items: - I’ve seen a YouTude vidéo where a person is using a studio strobe for lighting. From what I got as information, the strobe is a 300W. It is mounted vertically under the copy stand and there’s a hole in the table and copy stand. There is three levels of diffusion. Would you suggest such a setup for someone like me who is buying all from scratch, except the 5Ds and the Contax Zeiss Makro Planar 100mm f2,8? - I’ve seen both horizontal and vertical setups in the thread. Initially I was looking at an horizontal setup but then the idea of wet scanning came to my mind courtesy of YT… A vertically mounted negative wouldn’t be able to be wet scanned… what do you recommend? Thank you for any comments! --- _[View the full topic](https://forums.negativelabpro.com/t/lets-see-your-dslr-film-scanning-setup/27)._