# Medium Format Digital Camera Scanning

**URL:** <https://forums.negativelabpro.com/t/medium-format-digital-camera-scanning/3052>\
**Category:** Digital Camera Scanning\
**Created:** [December 20, 2020, 1:42pm UTC](https://forums.negativelabpro.com/t/medium-format-digital-camera-scanning/3052 "2020-12-20T13:42:00Z")\
**Posts on this page:** 1\
**Showing post:** 20

<div class="post-metadata">

**Author:** ![Harry](https://avatars.discourse-cdn.com/v4/letter/h/f6c823/32.png) [@Harry](https://forums.negativelabpro.com/u/Harry)\
**Post date:** [September 24, 2024, 8:54pm UTC](https://forums.negativelabpro.com/t/medium-format-digital-camera-scanning/3052/20 "2024-09-24T20:54:13Z")

</div>

I’d say that the advantages are the same as they would be with a flatbed scanner, and the disadvantages of course, the whole procedure is a little time consuming and then there is the cost of materials.

A good thread here:

> [@Wet mounting for camera scans](https://forums.negativelabpro.com/t/wet-mounting-for-camera-scans/7781):
>
> Want my top-level camera scans of the best images to have less work for dusting, minimize scratches, etc. Special use case rather than an all-the-time thing. I did some searching with few definitive results specifically geared towards camera scans… Is there a good starting point for wet-mounting for camera scanning purposes? Should I just get the Epson Kit etc and use that with my lighting etc. Or does the glass create issues I am unaware of in a camera scan scenario vs flat or drum scan?

---

_[View the full topic](https://forums.negativelabpro.com/t/medium-format-digital-camera-scanning/3052)._