# Reprostation with flash

**URL:** <https://forums.negativelabpro.com/t/reprostation-with-flash/7464>\
**Category:** Digital Camera Scanning\
**Created:** [February 18, 2024, 8:33am UTC](https://forums.negativelabpro.com/t/reprostation-with-flash/7464 "2024-02-18T08:33:14Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![wolframorthacker](https://avatars.discourse-cdn.com/v4/letter/w/9dc877/32.png) [@wolframorthacker](https://forums.negativelabpro.com/u/wolframorthacker)\
**Post date:** [February 18, 2024, 8:33am UTC](https://forums.negativelabpro.com/t/reprostation-with-flash/7464/1 "2024-02-18T08:33:14Z")

</div>

Negative diareprostation with flash light and negative holder 120 and 135 negative supply (Valoi also possible) for friends of analogue/digital photography. Fast shutter speeds, no color or blurring problems. Conversion software Negative Lab Pro ( 🥰), tethering with Capture one.

 ![_DSF7951-Be](https://canada1.discourse-cdn.com/flex029/uploads/negativelabpro/original/2X/3/35eeaf61d151f44295f1f6739ae30eba0eb0b7f1.jpeg)

---

<div class="post-metadata">

**Author:** ![Harry](https://avatars.discourse-cdn.com/v4/letter/h/f6c823/32.png) [@Harry](https://forums.negativelabpro.com/u/Harry)\
**Post date:** [February 18, 2024, 9:36am UTC](https://forums.negativelabpro.com/t/reprostation-with-flash/7464/2 "2024-02-18T09:36:36Z")

</div>

Very interesting, I’d not seen one of those Godox AD100 flash units before. It looks like you’ve adapted a Durst B&W enlarger (6x9?) so presumably the flash just fires into the same mirrored mixing chamber perhaps with some extra diffusion. The specification says that it has manual settings from 1/256 to full power in 1/3 or 1/10 stop intervals which sounds great. Is the 1.8W LED modelling light bright enough for focusing?

You could also post this in the 'Let’s see your DSLR scanning setup thread:

> [@Let's see your DSLR film scanning setup!](https://forums.negativelabpro.com/t/lets-see-your-dslr-film-scanning-setup/27):
>
> Ok, let’s see it! Pictures and/or descriptions of your current DSLR Scanning setup. Just reply to share it! (Bonus points for sharing a few conversions using your setup!)

---

<div class="post-metadata">

**Author:** ![wolframorthacker](https://avatars.discourse-cdn.com/v4/letter/w/9dc877/32.png) [@wolframorthacker](https://forums.negativelabpro.com/u/wolframorthacker)\
**Post date:** [February 18, 2024, 6:10pm UTC](https://forums.negativelabpro.com/t/reprostation-with-flash/7464/3 "2024-02-18T18:10:56Z")

</div>

Only the tripod is DURST, the reproduction station is a converted Homrich 4x5’ reproduction station. Mixing chamber: white Styrofoam.  
Modeling light is sufficient.  
Flash setting approximately KB: f10 approx. 1/16 power; 120: f10 1/4, Exposure: ASA 100, film layer at +2EV.  
The Godox AD200pro with round head can also be used for more performance (advantage of higher modeling light and flash output).

---

<div class="post-metadata">

**Author:** ![Harry](https://avatars.discourse-cdn.com/v4/letter/h/f6c823/32.png) [@Harry](https://forums.negativelabpro.com/u/Harry)\
**Post date:** [February 18, 2024, 6:30pm UTC](https://forums.negativelabpro.com/t/reprostation-with-flash/7464/4 "2024-02-18T18:30:40Z")

</div>

Thanks, that’s a nice setup. The base housing wouldn’t be too difficult to make in fact so it’s very practical.