# Suggested backlight sources for scanning film with DSLR **URL:** \ **Category:** Digital Camera Scanning\ **Created:** [March 27, 2019, 6:58pm UTC](https://forums.negativelabpro.com/t/suggested-backlight-sources-for-scanning-film-with-dslr/130 "2019-03-27T18:58:12Z")\ **Posts on this page:** 1\ **Showing post:** 331
**Author:** ![gihlsong](https://yyz1.discourse-cdn.com/flex029/user_avatar/forums.negativelabpro.com/gihlsong/32/1202_2.png) [@gihlsong](https://forums.negativelabpro.com/u/gihlsong)\ **Post date:** [August 31, 2026, 3:34pm UTC](https://forums.negativelabpro.com/t/suggested-backlight-sources-for-scanning-film-with-dslr/130/331 "2026-08-31T15:34:13Z")
Yes, that’s correct. I was originally planning to replace my old RaLeno PLV-S192, but I ended up returning it because there was a problem with the product. In fact, the PLV-S192 worked perfectly well for scanning 4x5 color slides and black & white film, so I decided not to purchase the P260C again. Then I came across an article about a DIY lightbox, which piqued my curiosity. 😀 > [@Let's see your DSLR film scanning setup!](https://forums.negativelabpro.com/t/lets-see-your-dslr-film-scanning-setup/27/106): > > Linear guide rail slides and linear guide bearing blocks have also arrived. This setup is used for 1x2 or 2x2 multi shots of 4x5 film. > [@Diffuser for DIY scan light source](https://forums.negativelabpro.com/t/diffuser-for-diy-scan-light-source/2402/12): > > This is the lighting setup I use when capturing 4x5 black and white negatives. (1x2 multiple captures). I use a 3mm thick acrylic plastic sheet. Although you can’t see it in this photo, I put a rubber pad between the acrylic plastic sheet and the LED panel. I use 2 pieces of Tru Vue museum glass. When I scan, I turn off all lights in the room. Also, I scan 4x5 films with a large black mask. --- _[View the full topic](https://forums.negativelabpro.com/t/suggested-backlight-sources-for-scanning-film-with-dslr/130)._