Upgrade scanning setup for MF

[Harry]

It might have been this thread:

Do I need to change my lens/camera to scan medium format?

I have an XT-2 and the Fuji 80mm macro lens. Is this enough to scan all medium format sizes and also slides? I want a setup that can do all formats and to know if I have to upgrade the megapixels in my camera to do this. I want to produce scans that are of at least lab quality or what you would get if you go to a scanning service. Is that possible with my current setup? The other issue besides the camera is that the 80 is a focal length of 120mm full frame isn’t it? Does this mean my stand will…

Or could it have been this one?

Recommend camera/lens combination for scanning 4x5 and 6x7 negs

Hi, I’m trying to figure out the best possible combination of camera and lens for scanning my 4x5/6x7 negs with the caveat being my budget, which is up to 1000(1200 max) euros. I thought I had it narrowed down to Sony A7 mk 1 , but I just read about the shutter shock so I guess it is a no-go. Resolution is important as I have plans to print big and i don’t mind doing multiple shots and stitching. That being said I guess I will need extension tubes? Bonus one:) Do you have some recommendation…

Either way, just using your own illustration, with a 24MP camera and a single shot:

6x6 (56 x 56mm)- 16 MP
6x7 (56 x 67mm) - 19 MP
6x9 (56 x 82mm) - 23.5 MP

Stitched, long side of sensor across width of film:

6x6 (56 x 56mm)- 36 MP
6x7 (56 x 67mm) - 43 MP
6x9 (56 x 82mm) - 52 MP